How it works in the water
Stable irrigation water starts in storage
A reliable irrigation process starts before the water enters the pipes. WATER TREATMENT makes water storage the first active management point in the system. Conditions are supported at the source, before changes become noticeable further along the irrigation process.
Straight into the water
The microbial formulation is added to the water storage and spreads through the water present.
Managing organic load
The added microbiology helps make the organic load part of a managed biological process.
Supporting biological balance
Regular application helps maintain an active and balanced microbiological environment in the stored water.
Stable towards the irrigation system
By supporting the water during storage and recirculation, WATER TREATMENT contributes to more consistent irrigation conditions.
Application systems
Where is WATER TREATMENT used?
Developed for professional storage and recirculation of irrigation water.
Water silos
Storage tanks
Water basins
Recirculation systems
Dosing at a glance
Application and dosage
Shake well before use and add to the stored irrigation water.
| Application timing | Dose |
|---|---|
| One-time initial dose | 10 L per 50,000 L2.64 US gal per 13,209 US gal of water |
| Every four weeks | 5 L per 50,000 L1.32 US gal per 13,209 US gal of water |
Product information
Technical product data
- Storage
- Store between 5 °C and 20 °C.Do not freeze.Protect from direct sunlight.
- Shelf life
- 12 months from the manufacturing date when stored as directed
- Pack sizes
- 5 L ·10 L ·600 L ·1000 L
Composition
Bacillus blend2.7%
Demineralised water97.3%
Total100.0%
The values come from the current product label. Dosing, pack sizes and regional documentation may differ per market; always follow the label for your market.
Documentation & support
Product documentation
Request the current product label or discuss the application with one of our specialists.
From water storage to emitter
Two products.Each in its place.
WATER TREATMENT is applied in water storage and recirculation. DRIP LINE focuses on microbial support further along the irrigation system: in the pipes and around the emitters.
Frequently asked questions
Frequently asked questions about WATER TREATMENT
Do I dose WATER TREATMENT based on the tank capacity or on the water it contains?
The dose is linked to the volume of water to be treated. So use the amount of water actually present, not automatically the maximum tank capacity. For 25,000 liters of water, the label’s starting ratio comes to 5 liters of product; the ratio for the four-weekly application to 2.5 liters. With continuous refilling or strongly fluctuating volumes, a tailored dosing plan is needed.
Does clear water after application mean it is also microbiologically safe?
Clarity mainly shows how much visible or suspended material is present. It does not tell you whether pathogens are absent. WATER TREATMENT is intended for stored agricultural water. Do not use the application as confirmation that the water has been disinfected. Assess water safety with a suitable analysis and your existing water management, even when the water looks clear.